Monocle Stamper v2.0: XL Round Clear Stamper
Our Monocle Stamper is back and even better than ever! The Monocle version 2.0 is an XL-sized round stamper (1.5-inch diameter surface) with a crystal clear silicone head and clear acrylic handle. This improved version now includes a removable backing to help you protect it from acetone or scratches. Remove the backing for easier visibility when applying your designs. This product comes with 1 mini scraper card.
*TAKE SPECIAL CARE*: These monocle heads take a lot of love to create, make sure to continue that love with these helpful care tips:
- Do not prime the clear head. Sanding will cause haziness. Instead, wash with soap and water before first use and allow to air dry.
- Use our Sticky Stamper Station, a lint roller, or scotch tape to remove polish from monocle heads. Using 100% acetone and other nail polish removers may cause the head to look cloudy.
- Do not over squeeze or pinch the monocle heads hard, it may cause the heads to tear!
Please note the handle is made with acrylic and will be permanently cloudy if it comes into contact with acetone.
"5 simple steps" for nail stamping
Paint a generous amount of stamping polish onto a design.
Scape off excess polish with the edge of a scraper card, holding it at a 45 degree angle.
Quickly, roll the stamper head onto the design.
Transfer the stamp onto your nail, using a smooth rolling motion.
Finish with a layer of Smudge Free Top Coat